Magnetic sensing devices are an inextricable part of the global marketplace for electronic products. Nearly 6 billion units are shipped each year, and that number is rapidly growing along with electronics in general. Magnetic sensors have thousands of uses, and product designers can choose from three main types—reed, Hall-effect and magnetoresistive—to provide low-power, high-precision position sensing capability.
Future fitness trackers could soon add blood-...
What began as research into a method to...
A partnership between Rensselaer Polytechnic Institute, IBM, and the FUND for Lake George has developed preliminary models of key natural processes within the watershed. A network of 12 sensor platforms including vertical profilers and tributary monitoring stations are now being deployed in Lake George and its tributaries, providing an unprecedented amount of data for researchers that will be interpreted at a new visualization laboratory.
Stanford Univ. engineers have invented a sensor that uses radio waves to detect subtle changes in pressure. Already used to monitor brain pressure in laboratory mice as prelude to possible use with human patients, this pressure-sensing technology relies on a specially designed rubber and could lead to touch-sensitive “skin” for prosthetic devices.
Using a common laboratory filter paper decorated with gold nanoparticles, researchers at Washington Univ. in St. Louis have created a unique platform, known as “plasmonic paper,” for detecting and characterizing even trace amounts of chemicals and biologically important molecules, including explosives, chemical warfare agents, environmental pollutants and disease markers.
Despite being outlawed in 2012 in the U.S., the synthetic drugs known as "bath salts" are still readily available in some retail shops, on the Internet and on the streets. To help law enforcement, scientists are developing low-cost, disposable, mercury-free electrodes that could be the basis for the first portable, on-site testing device for identifying the drugs.
Inspired by a desire to help wounded soldiers, an international team has created a paint-on, see-through, “smart” bandage that glows to indicate a wound’s tissue oxygenation concentration. Because oxygen plays a critical role in healing, mapping these levels in severe wounds and burns can help to greatly improve the success of surgeries to restore limbs and physical functions.
Researchers have discovered a way to create a highly sensitive chemical sensor based on the crystalline flaws in graphene sheets. The imperfections have unique electronic properties that the researchers were able to exploit to increase sensitivity to absorbed gas molecules by 300 times.
Using an optical microstructure and gold nanoparticles, scientists have amplified the interaction of light with DNA to the extent that they can now track interactions between individual DNA molecule segments. In doing so, they have approached the limits of what is physically possible. This optical biosensor for single unlabelled molecules could also be a breakthrough in the development of biochips:
One sip of a perfectly poured glass of wine leads to an explosion of flavors in your mouth. Researchers in Denmark have now developed a nanosensor that can mimic what happens in your mouth when you drink wine. The sensor, which uses gold nanoparticles to act as a “mini-mouth”, measures how you experience the sensation of dryness in the wine.
New technology under development at the Univ. of California, Berkeley could soon give bomb-sniffing dogs some serious competition. A team of researchers has found a way to dramatically increase the sensitivity of a light-based plasmon sensor to detect incredibly minute concentrations of explosives.
Researchers from North Carolina State Univ. and the Univ. of Eastern Finland have developed new “sensing skin” technology designed to serve as an early warning system for concrete structures, allowing authorities to respond quickly to damage in everything from nuclear facilities to bridges.
Simple solid-state lasers consist of only one material. But quantum cascade lasers are made of a perfectly optimized layer system of different materials so the wavelength of the laser can be tuned. Now a method has been developed in Austria to create a laser and a detector at the same time, on one single chip, in such a way that the wavelength of the laser perfectly matches the wavelength to which the detector is sensitive.
PerkinElmer, Inc., has announced the launch of Elm, an innovative air monitoring service providing local air quality analysis for individuals, smart cities and sustainable communities. The Elm service enables the visualization and understanding of relevant real-time air quality detail, providing data that can be immediately accessed, both online and on mobile devices.
Researchers at the Univ. of Adelaide in South Australia have created a thermometer three times more precise than any existing device, able to measure temperature to 30 billionths of a degree. Using the phenomenon called a “whispering gallery”, which projects sounds, the scientists have designed a crystalline disk that concentrates and reinforces light, allowing them to track a minute difference in speed between red light and green light.
Research in Australia may help in the fight against terrorism with the creation of a sensor that can detect tiny quantities of explosives with the use of light and special glass fibers. The researchers have created a new optical fiber sensor which can detect explosives in concentrations as low as 6.3 ppm (parts per million). It requires an analysis time of only a few minutes.
Scientists at Battelle have developed a tiny bead that not only detects corrosion but delivers a payload to help heal the microscopic cracks that rust creates. Called the Battelle Smart Corrosion Detector, the beads look like a fine, whitish powder that can be mixed with coatings used to protect pipelines and other critical infrastructure subject to corrosion. Self-activating, they release a proprietary chemical that fills cracks.
A newly developed pressure sensor could help car manufacturers design safer automobiles and even help Little League players hold their bats with a better grip, scientists report. The study describing their high-resolution sensor, which can be painted onto surfaces or built into gloves, appears in Nano Letters.
Using principles of energy transfer more commonly applied to designing solar cells, scientists at Brookhaven National Laboratory have developed a new highly sensitive way to detect specific sequences of DNA, the genetic material unique to every living thing. The method is considerably less costly than other DNA assays and has widespread potential for applications in forensics, medical diagnostics and the detection of bioterror agents.
Scientists at Rice Univ. have created a nanoscale detector that checks for and reports on the presence of hydrogen sulfide in crude oil and natural gas while they’re still in the ground. The nanoreporter is based on nanometer-sized carbon material developed by a consortium of Rice labs led by chemist James Tour, R&D’s 2013 Scientist of the Year.
In the fictional Star-Trek universe, the tricorder was used to remotely scan patients for a diagnosis. A new device under development in the U.K. could perform that function through the use of chemical sensors on printed circuit boards. This would replace the current conventional diagnostic method, which is lengthy and is limited to single point measurements.
A research team has developed a small electronic sensing device that can alert users wirelessly to the presence of chemical vapors in the atmosphere.
Researchers from North Carolina State Univ. have found a way to reduce the coercivity of nickel-ferrite (NFO) thin films by as much as 80% by patterning the surface of the material, opening the door to more energy efficient high-frequency electronics, such as sensors, microwave devices and antennas.
Standing in a full-body scanner at an airport isn’t fun, and the process adds time and stress to a journey. It also raises privacy concerns. But researchers now report making several key advances in terahertz wave sensor technology to create a more precise and direct method for using these waves to detect explosives from greater distances.
It's not quite the bionics of science fiction, but European researchers have created a robotic hand that gave an amputee a sense of touch he hadn't felt in a decade. The experiment lasted only a week, but it let the patient feel if different objects were hard or soft, slim or round, and intuitively adjust his grasp.
Research from a team led by North Carolina State Univ. is opening the door to smarter sensors by integrating the smart material vanadium dioxide onto a silicon chip and using lasers to make the material magnetic. The advance paves the way for multifunctional spintronic smart sensors for use in military applications and next-generation spintronic devices.
Infrared sensors can be employed in a wide range of applications, such as driver assistance systems for vehicles or thermography for buildings. However, IR detectors need to be permanently cooled, resulting in cameras that are large, heavy and energy-intensive. Researchers are now developing IR sensors for the far-infrared region that can operate at room temperature and a new prototype camera is providing a test bed for development.
- Page 1