Semiconductors
Microwave cooks up solar cell materials
May 6, 2013 12:56 pm | News | Comments
University of Utah metallurgists have used an old microwave oven to produce a nanocrystal semiconductor rapidly using cheap, abundant, and less toxic metals than other semiconductors. X-ray crystallography, electron microscopy, and atomic spectroscopy all helped confirm that the CZTS (copper, zinc, tin, and sulfur) semiconductor was suitable for use in a solar cell.
Microwave cooks up solar cell materials
May 6, 2013 12:56 pm | News | Comments
University of Utah metallurgists have used an old microwave oven to produce a nanocrystal...
Room-temperature nuclear spins advance quantum computing efforts
April 30, 2013 11:42 am | News | Comments
An international team of researchers has recently succeeded in both initializing and...
Semiconductor spray paint could create organic electronics
April 25, 2013 9:46 am | News | Comments
Wake Forest University's Organic Electronics group has developed an organic...
NSF and SRC to fund research to create failure-resistant circuits
May 24, 2013 5:00 am | News | CommentsLeaders of the National Science Foundation (NSF) and the Semiconductor Research Corporation (SRC), the world's leading university-research consortium for semiconductors and related technologies, this week announced 18 new projects funded through a joint initiative to address research challenges in the design of failure-resistant circuits and systems.
New technique may open new era of atomic-scale semiconductor devices
May 22, 2013 8:08 am | News | CommentsResearchers at North Carolina State University have developed a new technique for creating high-quality semiconductor thin films at the atomic scale—meaning the films are only one atom thick. The technique can be used to create these thin films on a large scale, sufficient to coat wafers that are two inches wide, or larger.
Atomic-scale investigations solve key puzzle of LED efficiency
May 22, 2013 7:58 am | News | CommentsFrom the high-resolution glow of flat screen televisions to light bulbs that last for years, light-emitting diodes (LEDs) continue to transform technology. Their full potential, however, remains untapped. A contentious controversy surrounds the high intensity of indium gallium nitride, with experts split on whether or not indium-rich clusters within the material provide the LED's remarkable efficiency.
Scientists find new magic in magnetic material
May 8, 2013 4:04 pm | News | CommentsFrom powerful computers to super-sensitive medical and environmental detectors that are faster, smaller, and use less energy—yes, we want them, but how do we get them? In research that is helping to lay the groundwork for the electronics of the future, University of Delaware scientists have confirmed the presence of a magnetic field generated by electrons which scientists had theorized existed, but that had never been proven until now.
Improving materials that convert heat to electricity and vice-versa
May 6, 2013 7:50 am | News | CommentsThermoelectric materials can be used to turn waste heat into electricity or to provide refrigeration without any liquid coolants, and a research team from the University of Michigan has found a way to nearly double the efficiency of a particular class of them that's made with organic semiconductors.
Engineers generate world-record millimeter-wave output power from nanoscale CMOS
April 25, 2013 7:44 am | News | CommentsA team of electrical engineers from Columbia University has generated a record amount of power output—by a power of five—using silicon-based nanoscale CMOS technology for millimeter-wave power amplifiers. Power amplifiers are used in communications and sensor systems to boost power levels for reliable transmission of signals over long distances as required by the given application.
Nanowires grown on graphene have surprising structure
April 23, 2013 7:54 am | News | CommentsWhen a team of University of Illinois engineers set out to grow nanowires of a compound semiconductor on top of a sheet of graphene, they did not expect to discover a new paradigm of epitaxy. The self-assembled wires have a core of one composition and an outer layer of another, a desired trait for many advanced electronics applications.
Germanium made compatible with lasers
April 22, 2013 9:27 am | News | CommentsBy introducing high tensile strain, a research group in Switzerland has rendered germanium, which is normally unsuitable for lasers, capable of emitting 25 times more photons than in its relaxed state. This change alters the optical properties of the material and is enough to allow the construction of lasers from this material. This is valuable because germanium is highly compatible with silicon.
Researchers develop device to mitigate blackouts, prevent equipment damage
April 19, 2013 7:54 am | News | CommentsA local power failure in Ohio ten years ago caused a series of cascading power failures that resulted in a massive blackout. Such blackouts could be prevented in the future, thanks to a new piece of equipment developed by engineering researchers at the University of Arkansas. The device regulates or limits the amount of excess current that moves through the power grid when a surge occurs.
Layered 2D nanocrystals promising new semiconductor
April 16, 2013 8:52 am | News | CommentsResearchers are developing a new type of semiconductor technology for future computers and electronics based on "2D nanocrystals" layered in sheets less than a nanometer thick that could replace today's transistors. The layered structure is made of a material called molybdenum disulfide, which belongs to a new class of semiconductors—metal di-chalogenides—emerging as potential candidates to replace today's CMOS technology.
Redesigned material could lead to lighter, faster electronics
April 10, 2013 12:57 pm | News | CommentsThe same material that formed the first primitive transistors more than 60 years ago can be modified in a new way to advance future electronics, according to a new study. Chemists at The Ohio State University have developed the technology for making a one-atom-thick sheet of germanium, and found that it conducts electrons more than ten times faster than silicon and five times faster than conventional germanium.
High-efficiency neutron imaging detector features new oblique design
March 31, 2013 6:53 pm | News | CommentsTo increase the neutron detection efficiency of bulk-micromegas (MICRO-MEsh GAseous Structure) neutron detectors, researchers from China and the University of Tennessee-Knoxville have proposed three new types of thin-film converters: micro-channel, parallel micro-pillar, and oblique micro-pillar 2D array. When validated using Monte Carlo simulations, the latter design showed a threefold increase in neutron detection efficiencies.
Engineers enable bulk silicon to emit visible light for the first time
March 27, 2013 2:56 pm | News | CommentsCertain semiconductors, when imparted with energy, in turn emit light; they directly produce photons, instead of producing heat. This phenomenon is commonplace and used in light-emitting diodes, or LEDs. Research from the University of Pennsylvania has enabled "bulk" silicon to emit broad-spectrum, visible light for the first time, opening the possibility of using the element in devices that have both electronic and photonic components.
Paint-on plastic electronics
March 25, 2013 7:51 am | News | CommentsSemiconducting polymers are an unruly bunch, but University of Michigan engineers have developed a new method for getting them in line that could pave the way for cheaper, greener, "paint-on" plastic electronics.
Researchers improve laser potential of MEH-PPV polymer
March 18, 2013 1:45 pm | News | CommentsMEH-PPV is a low-cost polymer that can be integrated with silicon chips, and researchers have sought to use it to convert electricity into laser light for use in photonic devices. However, attempts to do this have failed because the amount of electricity needed to generate laser light in MEH-PPV was so high that it caused the material to degrade. Researchers have recently come up with a low-cost way to enhance MEH-PPV’s ability to confine light, protecting the material.
MIT researchers develop solar-to-fuel roadmap for crystalline silicon
March 5, 2013 11:12 am | by David L. Chandler, MIT News Office | News | CommentsBringing the concept of an “artificial leaf” closer to reality, a team of researchers at Massachusetts Institute of Technology has published a detailed analysis of all the factors that could limit the efficiency of such a system. The new analysis lays out a roadmap for a research program to improve the efficiency of these systems, and could quickly lead to the production of a practical, inexpensive and commercially viable prototype.
Connecting the quantum dots
February 26, 2013 12:51 pm | News | CommentsRecent research offers a new spin on using nanoscale semiconductor structures to build faster computers and electronics. Literally. Researchers have revealed a new method that better preserves the units necessary to power lightning-fast electronics, known as qubits. Hole spins, rather than electron spins, can keep quantum bits in the same physical state up to 10 times longer than before, the report finds.
Researchers create semiconductor "nano-shish-kebabs"
February 19, 2013 3:16 pm | News | CommentsResearchers at North Carolina State University have developed a new type of nanoscale structure that resembles a “nano-shish-kebab,” consisting of multiple 2D nanosheets that appear to be impaled upon a 1D nanowire. However, the nanowire and nanosheets are actually a single, 3D structure consisting of a seamless series of germanium sulfide (GeS) crystals. The structure holds promise for use in the creation of new, 3D technologies.
Production process doubles speed, efficiency of flexible electronics
February 19, 2013 10:44 am | News | CommentsStretched-out clothing might not be a great practice for laundry day, but in the case of microprocessor manufacture, stretching out the atomic structure of the silicon in the critical components of a device can be a good way to increase a processor's performance.
Physicists show that organic semiconductors withstand sharp bends
February 5, 2013 11:41 am | News | CommentsOrganic semiconductors hold promise for making low-cost flexible electronics—if they can perform in spite of frequent flexing and sharp bending. Scientists have recently demonstrated extremely flexible organic semiconductors that withstood multiple bending cycles in which the devices were rolled to a radius as small as 200 μm. The scientists worked with numerous crystalline devices they made and found no degradation in their performance.
Self-assembling silica microwires may enable integrated optical devices
January 23, 2013 10:23 am | News | CommentsSilica microwires are the tiny and as-yet underutilized cousins of optical fibers. If precisely manufactured, however, these hair-like slivers of silica could enable applications and technology not currently possible with comparatively bulky optical fiber. By carefully controlling the shape of water droplets with an ultraviolet laser, a team of researchers from Australia and France has found a way to coax silica nanoparticles to self-assemble into much more highly uniform silica wires.
World’s most complex 2D laser beamsteering array demonstrated
January 17, 2013 5:09 pm | News | CommentsExisting optical beamsteering assemblies for technologies like LADAR, which scans a field of view with a laser to determine distance, are typically mechnical, bulky, slow, and inaccurate. In an effort to design a better, scalable technology, DARPA researchers have recently demonstrated the most complex optical phased array ever built onto a 2D chip.
Researchers develop integrated dual-mode active and passive infrared camera
January 16, 2013 1:14 pm | News | CommentsHigh-performance infrared cameras are usual for night-vision goggles and are usually either active, which use invisible infrared sources, or passive, which detect thermal radiation without the need for illumination. Integrating both modes has proven challenging, but researchers at Northwestern University have done by using advanced type-II superlattice materials.
How to treat heat like light
January 11, 2013 7:29 am | by David L. Chandler, MIT News Office | News | CommentsA Massachusetts Institute of Technology researcher has developed a technique that provides a new way of manipulating heat, allowing it to be controlled much as light waves can be manipulated by lenses and mirrors. The approach relies on engineered materials consisting of nanostructured semiconductor alloy crystals.
Better than diamond
January 7, 2013 1:39 pm | by Gunnar Bartsch | News | CommentsSilicon carbide crystals consist of a regular lattice formed by silicon and carbon atoms. At present, these semiconductors are extensively used in micro and opto-electronics. Physicists have recently modified silicon carbide crystals in a way that these exhibit new and surprising properties. This makes them interesting with regard to the design of high-performance computers or data transmission.
