Flickering façades, curved monitors, flashing clothing, fluorescent wallpaper, flexible solar cells—and all printable. This is no make-believe vision of the future; it will soon be possible using a new printing process for organic light-emitting diodes.
Belgian nanoelectronics research center Imec and...
If consumer electronics companies are to be...
An industry-academic partnership has created two different optical components that can...
A new method developed in Germany makes it possible to manufacture ultra-thin saw wires by placing diamond on carbon nanotubes. The new invention is designed to cut through silicon wafers with minimum kerf, or “sawdust”, loss that is the unavoidable result of current tools used in semiconductor wafer fabrication.
A study of the photovoltaic industries in the U.S. and China shows that China's dominance in solar panel manufacturing is not driven solely by cheaper labor and government support, but by larger-scale manufacturing and resulting supply-chain benefits. Researchers say a balance could be achieved through future innovations in crystalline solar cell technology.
A collaboration of scientists from the Univ. of Minnesota and the National Renewable Energy Laboratory have developed a new method to use an ionized gas, called nonthermal plasma, to produce silicon nanocrystals and cover their surfaces with a layer of chlorine atoms. This method allows production of stable silicon inks without organic ligand molecules and also greatly enhances conductivity.
Researchers in California have demonstrated that indium phosphide, a III-V compound, can be grown on thin sheets of metal foil in a process that is faster and cheaper than traditional methods, yet still comparable in optoelectronic characteristics. Indium phosphide is among the high-performance solar converter, but has been up to 10 times as expensive as silicon to integrate in photovoltaic cells.
Diffusion of sodium ions from the glass substrate is thought to be the primary cause of potential-induced degradation (PID) in crystalline silicon photovoltaic cells. A research institute and metals company in Japan have partnered to develop a thin film solution. The titanium oxide-based composite metal compound they have developed is inexpensive to produce and highly scalable.
Flexible electronics have a wide variety of possibilities, from bendable displays and batteries to medical implants that move with the body. Networks of spherical nanoparticles embedded in elastic materials may make the best stretchy conductors yet, engineering researchers at the Univ. of Michigan have discovered.
Researchers at Arizona State Univ. have successfully manufactured the world’s largest flexible color organic light emitting display prototype using advanced mixed oxide thin film transistors. Measuring 7.4 diagonal inches, the device was developed at ASU’s Flexible Display Center in conjunction with Army Research Labs scientists.
A team led by Rice University chemist James Tour has built a 1-kilobit rewritable device with diodes that eliminate data-corrupting crosstalk. This chip, which uses cheap, plentiful silicon oxide to store data, shows it should be possible to surpass the limitations of flash memory in packing density, energy consumption per bit and switching speed.
In the constant push for smaller transistors, researchers have been investigating oxides with higher K, or dielectric constant, values. Materials such as germanium, hafnium, and titanium are being investigated for this role, but many prototypes leak electrons. At the National Synchrotron Light Source, x-rays are being used to probe the electronic behavior of a germanium-based transistor structure that could offer a solution.
At the IEEE Photovoltaic Specialists Conference in Tampa, Fla. last week, National Renewable Energy Laboratory scientist Myles Steiner announced a world record of 31.1% conversion efficiency for a two-junction solar cell under one sun of illumination. The achievement edges the previous record of 30.8% by Alta Devices.
At this week’s International Image Sensor Workshop in Utah, Belgium’s imec and Holst Centre, in collaboration with Philips Research, will present a large-area fully-organic photodetector array fabricated on a flexible substrate. The imager is sensitive in the wavelength range suitable for x-ray imaging applications.
University of Utah metallurgists have used an old microwave oven to produce a nanocrystal semiconductor rapidly using cheap, abundant, and less toxic metals than other semiconductors. X-ray crystallography, electron microscopy, and atomic spectroscopy all helped confirm that the CZTS (copper, zinc, tin, and sulfur) semiconductor was suitable for use in a solar cell.
Unlike the building blocks of conventional hard disk drives and memories, resistive memory cells (ReRAM) are active electrochemical components. In these cells, ions generate voltage on electrodes in a similar manner to a battery. Researchers in Europe have conducted an extensive study of ReRAMs, also described as memristors, and have found previously undiscovered sources of voltage in these devices.
Silicon dominates in microelectronics and photovoltaics industry, but has been considered unsuitable for light-emitting diodes for a long time. At the nanoscale, however, its properties change. Scientists in Germany and Canada have now succeeded in manufacturing silicon-based light-emitting diodes (SiLEDs) using silicon nanocrystals a few nanometers in size. They are free of heavy metals and can emit light in various colors.
Organic semiconductors hold promise for making low-cost flexible electronics—if they can perform in spite of frequent flexing and sharp bending. Scientists have recently demonstrated extremely flexible organic semiconductors that withstood multiple bending cycles in which the devices were rolled to a radius as small as 200 μm. The scientists worked with numerous crystalline devices they made and found no degradation in their performance.
Researchers at Columbia University are attempting to build self-powered systems using nanoscale devices that can transmit and receive wireless signals using so little power that their batteries never need replacing. Some of the chips built so far are 100 times more energy efficient than most standard technologies, and they rely on tiny bits of ambient solar energy to recharge themselves.
Advanced electronics are indispensable in modern warfare, but locating and tracking them all on the field of battle is almost impossible. To prevent valuable and strategic technology from falling into enemy hands, DARPA has announced the Vanishing Programmable Resources program, which has the aim of improving “transient” electronics, or electronics capable of dissolving into the environment around them.
Researchers in Germany have developed a new generation of image sensors that are more sensitive to light than the conventional silicon versions. Simple and cheap to produce, they consist of electrically conductive plastics which are sprayed onto the sensor surface in an ultra-thin layer. The chemical composition of the polymer spray coating can be altered so that even the invisible range of the light spectrum can be captured.
Silica microwires are the tiny and as-yet underutilized cousins of optical fibers. If precisely manufactured, however, these hair-like slivers of silica could enable applications and technology not currently possible with comparatively bulky optical fiber. By carefully controlling the shape of water droplets with an ultraviolet laser, a team of researchers from Australia and France has found a way to coax silica nanoparticles to self-assemble into much more highly uniform silica wires.
Existing optical beamsteering assemblies for technologies like LADAR, which scans a field of view with a laser to determine distance, are typically mechnical, bulky, slow, and inaccurate. In an effort to design a better, scalable technology, DARPA researchers have recently demonstrated the most complex optical phased array ever built onto a 2D chip.
Electronics devices are a mainstay of our daily lives. But the expectation that the next shopping season will inevitably offer an upgrade to more-powerful gadgets largely depends on size, and developers who employ top down manufacturing methods are running into expensive roadblocks as the domain shrinks to the nanoscale. To go further, some researchers looking at a bottom up method, coaxing individual molecules to self-arrange into patterns.
Not everything there is “high-tech”, but the annual Consumer Electronics Show is a great place to see the newest and most fanciful products to reach the market each year. From the iPotty for toddlers to the 1,600-pound (725-kg) mechanical spider and the host of glitch-ridden "smart" TVs, the International CES show is a forum for gadget makers to take big—and bizarre—chances.
After more than a decade of research, chip engineers at IBM Research have built a scalable, fab-ready microchip that successfully integrates a complete optical package built from silicon. This silicon nanophotonics breakthrough allows the new chip, which is built on an existing high-performance 90-nm CMOS fabrication line, to exceed a transceiver data rate of 25 Gbps per channel.
A completely new method of manufacturing the smallest structures in electronics could make their manufacture thousands of times quicker, allowing for cheaper semiconductors. Instead of starting from a silicon wafer or other substrate, as is usual today, researchers have made it possible for the structures to grow from freely suspended nanoparticles of gold in a flowing gas.
When it comes to imaging, every single photon counts if there is barely any available light. This is the point where the latest technologies often reach their limits. Researchers have now developed a single photon avalanche photodiode that can read individual photons in just a few picoseconds. The speed allows the image sensor to capture high quality images with very low light levels.
- Page 1