Advertisement
ELECTRONIC COMPONENTS

Eureka Ultra Low Humidity Dry Cabinet

March 25, 2015 2:02 am | Eureka Dry Tech | Products

Eureka Ultra Low Humidity SMT Dry Cabinet provides moisture controlled storage and handling environments of <5%RH, <10%RH, and <20%RH with speedy recovery times. Meets IPC/JEDEC J-Std-033C & IPC-1601 standards for resetting floor life and storage of components rated up to MSL 5a without harms caused by baking. Moisture sensitive components and devices packaged on SMT tape and reel can not be baked to remove moisture. Eureka's Dry Cabinet provides alternative drying methods to baking oven and nitrogen purge in moisture removal. Contact us today with your needs and we will provide you with the best solution.

LISTED UNDER: Assemblies, Electronic | Packaging | Equipment/Supplies

OEM Pressure Transmitters

March 24, 2015 5:44 pm | by Gems Sensors & Controls | Gems Sensors & Controls | Product Releases | Comments

Gems Sensors & Controls (Gems) has introduced its Model 3800/3820 Series. The new Gems Model 3800/3820 Series is a family of reliable, accurate, compact OEM pressure transmitters and switches for hazardous area and other hostile environments. The new Model 3800 Series pressure transmitter is available in seven unique ranges from 0 to 10,000 psi (0 to 689 bar), with choice of loop-powered (4-20 mA) or low-power (1-5 VDC) output.

LISTED UNDER: Transducers, Pressure

Burn-in Test Socket

January 16, 2015 11:46 am | by Ironwood Electronics | Product Releases | Comments

Ironwood Electronics has introduced a new Stamped spring pin socket addressing burn-in test requirements for testing 74 lead QFN - CBT-QFN-7038. The contactor used in CBT-QFN-7038 socket is a stamped spring pin with 15-g actuation force per ball and cycle life of 10,000+ insertions.

LISTED UNDER: Adapters, Electronic
Advertisement

Integrated Optical Sensor

October 7, 2014 2:22 pm | Product Releases | Comments

Osram Opto Semiconductors has developed a new optical sensor for automatic fitness tracking. The SFH 7050 is Osram’s first integrated optical sensor. It is designed for use in mobile devices, such as smart watches and fitness armbands. The sensor contains three light emitting diodes with different wavelengths, based on highly efficient chip technology.

LISTED UNDER: ELECTRONIC COMPONENTS | Assemblies | Assemblies, Electronic

Pure Sine Wave Inverter System

September 30, 2014 1:58 pm | Product Releases | Comments

Schaefer Inc. has unveiled new turnkey inverter systems using its Series IT of single or three-phase switch mode inverter systems with a power range from 6 kVA to 90 kVA. These highly reliable, fully-customizable "built-to-project" dc/ac pure sine wave inverters are fully isolated, using a switch mode inverter with a rectifier at input and a transformer at the output.

LISTED UNDER: Current Transformers

LVDT Signal Conditioners

September 26, 2014 10:27 am | Product Releases | Comments

Alliance Sensors Group has released the S1A and SC-100 DIN-rail-mounted, push-button-calibrated linear variable differential transformer (LVDT) signal conditioners, which offer smart and fast LVDT setup with built-in null indication and simple front panel pushbuttons to set zero and full scale.

LISTED UNDER: Current Transformers

Compact Directional Coupler

September 25, 2014 11:21 am | Product Releases | Comments

Krytar Inc. has launched a new Directional Coupler, Model 181206, operating in the frequency range of 12.4 to 18.0 GHz and offering nominal coupling of 6 dB in a compact package. The coupler is designed for systems applications where external leveling, precise monitoring, signal mixing or swept transmission and reflection measurements are required.

LISTED UNDER: Connectors

Wireless UART Data Transceiver

September 22, 2014 2:39 pm | Product Releases | Comments

Designed with low cost in mind, Linx Technologies has released the new HumDT Series Transceiver. At 11.5 mm by 14.0 mm, the HumDT uses advanced system on chip technology to minimize the footprint and the number of components. The transceiver has built-in networking with encryption and each module can act as one of three components in the wireless network.

LISTED UNDER: Board Devices
Advertisement

High Current Connectors

July 29, 2014 10:19 am | Product Releases | Comments

TE Connectivity has announced the launch of its new Deutsch Autosport Heavy Duty (ASHD) 3-Way Connector. The new connector was designed for the growing hybrid market in motorsports, in which racecars use three-phase motor/generator systems.

LISTED UNDER: Connectors, High Density

Non-destructive Acoustic Metrology

July 22, 2014 2:05 pm | Product Releases | Comments

Rudolph Technologies, Inc. has announced the availability of its new SONUS Technology, designed for measuring thick films and film stacks used in copper pillar bumps and for detecting defects, such as voids, in through silicon vias (TSVs). It is a non-contact, non-destructive acoustic metrology and defect detection technique that is designed to be of higher resolution, faster, and less costly than alternative techniques.

LISTED UNDER: Electronics Manufacturing Equipment | Semiconductor Manufacturing | Instrumentation

Thermocouple Amplifier Signal Conditioner Module

July 16, 2014 10:06 am | Product Releases | Comments

The Sensor Connection has expanded its line of measurement and control instrumentation with the addition of the model TCA-MS-K-8-A4. This 8 Channel Type K Thermocouple Amplifier Module converts the low output voltage signal from 8 Type K thermocouple probes to 8 independent linearized 0 to 5 VDC output voltages.

LISTED UNDER: Current Transformers

75 Ohm F Attenuators

July 8, 2014 2:14 pm | Product Releases | Comments

Pasternack Enterprises, Inc., a manufacturer and supplier of RF, microwave and millimeter wave products, has announced its expanded line of 75 Ohm F attenuators. This new line of F-type attenuators is designed for broadcast, HDTV and satcom applications in the L and S microwave bands up to 3 GHz.

LISTED UNDER: Components

Multi-channel Dimming Receptacle

April 1, 2014 3:58 pm | Product Releases | Comments

TE Connectivity is debuting its ANSI C136.41 compliant solution for the electrical and mechanical interconnection between a photo control cell and a street lighting luminaire at the Light+Building show in Frankfurt, Germany. The ANSI C136.41 dimming receptacle is pre-configured with wire leads to allow for ease of integration into a new or existing outdoor lighting fixture.

LISTED UNDER: Assemblies, Electronic | Lighting

Miniature Incremental Optical Encoder

March 19, 2014 1:34 pm | Product Releases | Comments

Renishaw’s new ATOM non-contact optical linear and rotary incremental encoder system combines miniaturization with dirt immunity, signal stability and reliability. With a read-head as small as 6.7 x 12.7 x 20.5 mm, ATOM is the world’s first miniature encoder to use filtering optics with auto gain control and auto offset control.

LISTED UNDER: Assemblies, Electronic | Motors, AC/DC

Precision Temperature Controller

January 17, 2014 12:51 pm | Product Releases | Comments

The new Model 5R7-388 RoHS compliant temperature controller from Oven Industries offers bi-directional control for independent thermoelectric modules or in conjunction with auxiliary or supplemental resistive heaters for both cooling and heating applications.

LISTED UNDER: Board Devices | Temperature Calibrators | Temperature Sensors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading