Advertisement
News
Advertisement

Built-in germanium lasers could make computer chips faster

Mon, 09/10/2012 - 9:05am

 

GermaniumChip1-250

Peter Friedli and Hans Sigg preparing the experiment at the Infrared Beamline at the SLS for determining the laser properties of Germanium. Photo: Frank Reiser, Paul Scherrer Institut

 

Paul Scherrer Institute (PSI) researchers have investigated how they could make the semiconductor Germanium emit laser light. As a laser material, germanium together with Silicon could form the basis for innovative computer chips in which information would be transferred partially in the form of light. This technology would revolutionize data streaming within chips and give a boost to the performance of electronics. The researchers have demonstrated that germanium must be put under strain by an external force in order to turn it into a laser material. The decisive investigations were carried out by the scientists at the Swiss Light Source (SLS) at PSI and their results have recently appeared in the scientific journal Physical Review Letters. The research was supported by the Swiss National Science Foundation (SNSF).

In 1965, Gordon Moore proposed a law stating that the surface density of transistors in computer chips—and consequently their computing power—would double every two years. This law has proved to be valid since the beginning of the digital age; that is, since the introduction of the first integrated circuits for micro-processors, in 1960. However, in spite of the increasing number of transistors in computer chips, as well as other progress which has been made, the overall performance of processors has not been able to follow Moore’s Law for the past decade, and specialists are now talking about ‘Moore’s Gap’. The reason for this is that modern chips have more cores—individual processors—that can only relatively slowly communicate with each other using current technology.

“Actually, we do know a way in which this gap can be closed. The key concept is “optical data transfer” between the different cores on the chip,” explains Hans Sigg, a PSI scientist. “This means partially transferring information inside a chip with the aid of laser pulses, which would significantly speed up the information exchange.”

In order to do this, tiny lasers are needed which can be built into chips to send out light pulses. These, however, have so far not been available.

Tiny germanium lasers should make chips faster

Sigg’s research team, together with colleagues from the ETH Zurich and the Politecnico di Milano, has now been able to demonstrate that germanium, under certain conditions, can function as a laser material.

“Germanium lasers could make a break-through possible here, because germanium can be readily combined with silicon, which is the basic material from which chips are made. Silicon itself cannot emit light and can hardly be combined with any available laser material,” points out Sigg.

GermaniumChip2

Peter Friedli and Hans Sigg preparing the experiment at the Infrared Beamline at the SLS for determining the laser properties of Germanium. Photo: Frank Reiser, Paul Scherrer Institut

In their studies, which were performed at the Swiss Light Source (SLS) at PSI, the researchers investigated those properties of germanium that are important for the generation of laser light, and compared them with those of currently available laser materials.

“We stimulate the material by means of a powerful laser and simultaneously observe the changes occurring using infra-red radiation from the SLS,” elucidates the doctoral student Peter Friedli, who carried out the decisive experiments together with scientist Lee Carroll. “To do this, we used the fact that these light pulses are only 100 picosec (i.e. 0.1 billionths of a second) long, allowing us to follow the relevant processes in the material; that is, the behavior of electrons at different points in time.”

Germanium must be deformed

“Our results are, on the one hand, encouraging, because Germanium behaves similarly to traditional laser materials, and therefore the possibility of it emitting light cannot be excluded,” says Sigg enthusiastically, “but with the limitation that the balance between amplification and loss is still so unfavorable in the Germanium layers investigated so far that the material does not yet fulfill the condition for emitting laser light.”

But it has been demonstrated that this condition can be more closely approached the more the germanium is put under strain using an external force. The researchers hope to achieve the necessary conditions for the germanium in a follow-up project. For this, they will use a new technology that allows the strain to be greatly increased.

This research project has been supported by the Swiss National Science Foundation (SNSF).

Source: Paul Scherrer Institute

Advertisement

Share This Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading