Nanolaser key to future optical computers

Posted In: R&D Daily | Nanotechnology | Engineering | Nanotechnology | Nanotechnology | Optics | Photonics | Optical Photonics | Purdue University

newsvine diigo google
slashdot
Share
Loading...

Researchers have created the tiniest laser since its invention nearly 50 years ago, paving the way for a host of innovations, including superfast computers that use light instead of electrons to process information, advanced sensors and imaging.

Spasers

Researchers have created the tiniest laser since its invention nearly 50 years ago. Because the new device, called a "spaser," is the first of its kind to emit visible light, it represents a critical component for possible future technologies based on "nanophotonic" circuitry. The color diagram (a) shows the nanolaser's design: a gold core surrounded by a glasslike shell filled with green dye. Scanning electron microscope images (b and c) show that the gold core and the thickness of the silica shell were about 14 nanometers and 15 nanometers, respectively. A simulation of the SPASER (d) shows the device emitting visible light with a wavelength of 525 nanometers.
(Birck Nanotechnology Center, Purdue University)

Because the new device, called a "spaser," is the first of its kind to emit visible light, it represents a critical component for possible future technologies based on "nanophotonic" circuitry, said Vladimir Shalaev, the Robert and Anne Burnett Professor of Electrical and Computer Engineering at Purdue University.

Such circuits will require a laser-light source, but current lasers can't be made small enough to integrate them into electronic chips. Now researchers have overcome this obstacle, harnessing clouds of electrons called "surface plasmons," instead of the photons that make up light, to create the tiny spasers.

Findings are detailed in a paper appearing online in the journal Nature that reports on work conducted by researchers at Purdue, Norfolk State University and Cornell University.

Nanophotonics may usher in a host of radical advances, including powerful "hyperlenses" resulting in sensors and microscopes 10 times more powerful than today's and able to see objects as small as DNA; computers and consumer electronics that use light instead of electronic signals to process information; and more efficient solar collectors.

"Here, we have demonstrated the feasibility of the most critical component - the nanolaser - essential for nanophotonics to become a practical technology," Shalaev said.

The "spaser-based nanolasers" created in the research were spheres 44 nanometers, or billionths of a meter, in diameter - more than 1 million could fit inside a red blood cell. The spheres were fabricated at Cornell, with Norfolk State and Purdue performing the optical characterization needed to determine whether the devices behave as lasers.

The findings confirm work by physicists David Bergman at Tel Aviv University and Mark Stockman at Georgia State University, who first proposed the spaser concept in 2003.

"This work represents an important milestone that may prove to be the start of a revolution in nanophotonics, with applications in imaging and sensing at a scale that is much smaller than the wavelength of visible light," said Timothy D. Sands, the Mary Jo and Robert L. Kirk Director of the Birck Nanotechnology Center in Purdue's Discovery Park.

The spasers contain a gold core surrounded by a glasslike shell filled with green dye. When a light was shined on the spheres, plasmons generated by the gold core were amplified by the dye. The plasmons were then converted to photons of visible light, which was emitted as a laser.

Spaser stands for surface plasmon amplification by stimulated emission of radiation. To act like lasers, they require a "feedback system" that causes the surface plasmons to oscillate back and forth so that they gain power and can be emitted as light. Conventional lasers are limited in how small they can be made because this feedback component for photons, called an optical resonator, must be at least half the size of the wavelength of laser light.

The researchers, however, have overcome this hurdle by using not photons but surface plasmons, which enabled them to create a resonator 44 nanometers in diameter, or less than one-tenth the size of the 530-nanometer wavelength emitted by the spaser.

"It's fitting that we have realized a breakthrough in laser technology as we are getting ready to celebrate the 50th anniversary of the invention of the laser," Shalaev said.

The first working laser was demonstrated in 1960.

The research was conducted by Norfolk State researchers Mikhail A. Noginov, Guohua Zhu and Akeisha M. Belgrave; Purdue researchers Reuben M. Bakker, Shalaev and Evgenii E. Narimanov; and Cornell researchers Samantha Stout, Erik Herz, Teeraporn Suteewong and Ulrich B. Wiesner.

Future work may involve creating a spaser-based nanolaser that uses an electrical source instead of a light source, which would make them more practical for computer and electronics applications.

The work was funded by the National Science Foundation and U.S. Army Research Office and is affiliated with the Birck Nanotechnology Center, the Center for Materials Research at Norfolk State, and Cornell's Materials Science and Engineering Department.

SOURCE

0 Comments

blog comments powered by Disqus

New To Market

more

JEOL to launch world's smallest solid-state NMR probe
JEOL to launch world's smallest solid-state NMR probe

According to JEOL Resonance, a new benchmark for resolution and benchmark will be set with its introduction next week of a new 0.75-mm solid state nuclear magnetic resonance (NMR) probe. The probe is capable of high resolution sample analysis by spinning the sample at 110 kHz, the world's fastest spinning speed for NMR.

Energy Harvesting Subsystems for Wireless Sensors

Nextreme Thermal Solutions has developed two new energy harvesting subsystems for the plumbing and HVAC industries. The subsystems are the latest additions to Nextreme's Thermobility energy harvesting platform that uses thin-film thermoelectric technology to convert available thermal energy into electric power for a variety of autonomous self-powered applications.

Tools & Technology

more

Plates, Stirrers Feature Five or Nine Positions
Plates, Stirrers Feature Five or Nine Positions

Torrey Pines Scientific Inc. has announced a new line of multi-position analog stirring hot plates and stirrers featuring five or nine stirring positions.

Phree Phospholipid Removal Plates

Phenomenex Inc. has introduced Phree phospholipid removal plates for fast cleanup of plasma samples in pharmaceutical and clinical research laboratories. In one step, Phree removes both proteins and phospholipids and delivers the prepared plasma to a collection plate.

Advertisement

Advertisement

Top Stories and Headlines
EVERY DAY!

FREE Email Newsletter