Ares test is problem-free

Posted In: R&D Daily | Engineering | Ames Research Center (NASA) | Glenn Research Center (NASA) | Goddard Space Flight Center (NASA) | Jet Propulsion Laboratory (NASA) | Langley Research Center (NASA) | Marshall Space Flight Center (NASA) | Aerospace | Space

By Mike Stark

Friday, September 11, 2009


newsvine diigo google
slashdot
Share
Loading...

PROMONTORY, Utah (AP)—The first test of NASA's powerful moon rocket went off without a problem Thursday as more than a million pounds of propellant ignited in a split second, sending a towering plume of sand and dust high into the Utah sky.

MoonRocket1 sized

The plume of smoke and dust from the five-segment, first stage of the Ares-1 rocket fills the area during a test at ATK Space Systems, Thursday, September 10, 2009 in Promontory, Utah. The motor is NASA's next generation transportation system designed for the Orion program. (AP Photo/Colin Braley)

For more than two minutes, flames roared out the end of the 154-foot Ares I rocket, which was anchored horizontally to the ground on a hill above the Great Salt Lake.

"That was something, wasn't it?" said a grinning Charlie Precourt, a former shuttle astronaut and vice president of Alliant Techsystems Inc.'s space launch systems.

More than 4,000 people witnessed the test and scores of others watched it on live television.

The rocket, capable of producing 3.6 million pounds of thrust, is intended as a more powerful alternative to the two solid rocket boosters used to launch the space shuttle. Precourt called it "the most powerful rocket on the planet."

Thursday's test was the second attempt in two weeks after a similar one was scrubbed Aug. 27 because of problems with a computer component on the ground test system.

The test of the $75 million in equipment in northern Utah comes amid new questions about funding for the space program.

The Ares I has been a centerpiece of NASA's $100 billion return to the moon plans, first suggested by President George W. Bush in 2004. The idea was that the Ares I would take the Orion crew capsule to the international space station in Earth orbit and to the moon, with the big equipment coming from a heavy lift rocket, still to be built, called Ares V.

But after money problems, delays, and technical issues, President Barack Obama appointed a special outside panel of experts to review NASA's future space plans. The committee's preliminary summary, issued Tuesday, said there wasn't enough money in the current budget to go to the moon and also suggested that the Ares I may not be the best option.

If NASA could secure funds, the report said, it should consider abandoning Ares I in favor of just using Ares V because it is more cost effective and flexible.

However, much of the $7.7 billion NASA has spent on the moon return program has been on the Ares I and a full-scale rocket is at the Kennedy Space Center scheduled for a Halloween test.

"We clearly present an alternative to building Ares I," MIT professor Ed Crawley, a member of the panel, told The Associated Press this week.

NASA and the White House have not made a decision about what to do next. They are waiting for the full report to be submitted, which is a few weeks away.

NASA and Alliant officials said they were pleased with Thursday's test — and happy to resolve the problem that plagued last month's attempted test.

MoonRocket2 sized

Launch Systems Engineers with ATK Launch Systems, prepare for a test firing of the five-segment first stage of the Ares-1 rocket, Aug. 27, 2009. A mechanical failure forced a NASA contractor on Thursday to call off the first test firing of the main part of NASA's powerful new moon rocket. (AP Photo/Colin Braley)

The culprit was a 30-year-old component in the ground control unit that helps move nozzle controls, which steer a rocket in flight. The piece has been replaced though it still isn't exactly clear why it failed, said Pat Lampton, NASA's chief engineer for the Ares first stage test.

At 1 p.m. Thursday, a giant flame shot down the rocket's interior and ignited 1.5 million pounds of propellant — a solid chemical mixture the consistency of a pencil eraser — coating the booster's interior.

The blast from the test could be heard for miles and scoured a deep hole in the hillside. Blazing heat turned a layer of sand into a glasslike material.

"After witnessing what we just saw, it's pretty easy to become speechless," Alex Priskos, NASA's Ares I first stage manager, said after Thursday's test.

Once the test finished, a crowd gathered in a VIP area about a mile away to cheer and congratulate officials from NASA and Alliant.

"I can breathe again," Lampton said. "It went like clockwork."

The Ares I first stage is divided into five segments — each packed with propellant — designed to boost a 321-foot-long vehicle and its crew 36 miles into space in about 120 seconds. From there, the rocket would drop away and another engine would take over.

During the test, 650 sensors inside the rocket were picking up signals to measure its performance and provide scientists with information about what might need to be tweaked for the next iteration as the model moves toward flight readiness. Researchers will spend weeks analyzing data from Thursday's test.

The test of Ares I first stage, under development since 2005, is one of seven scheduled for the motor design. The next is set for June 2010.

AP Science Writer Seth Borenstein in Washington, D.C., contributed to this report.

SOURCE: The Associated Press.

0 Comments

blog comments powered by Disqus

New To Market

more

JEOL to launch world's smallest solid-state NMR probe
JEOL to launch world's smallest solid-state NMR probe

According to JEOL Resonance, a new benchmark for resolution and benchmark will be set with its introduction next week of a new 0.75-mm solid state nuclear magnetic resonance (NMR) probe. The probe is capable of high resolution sample analysis by spinning the sample at 110 kHz, the world's fastest spinning speed for NMR.

Energy Harvesting Subsystems for Wireless Sensors

Nextreme Thermal Solutions has developed two new energy harvesting subsystems for the plumbing and HVAC industries. The subsystems are the latest additions to Nextreme's Thermobility energy harvesting platform that uses thin-film thermoelectric technology to convert available thermal energy into electric power for a variety of autonomous self-powered applications.

Tools & Technology

more

Benchtop LC-MS System
Benchtop LC-MS System

Thermo Fisher Scientific Inc. has introduced the Exactive Plus system, a benchtop liquid chromatography-mass spectrometry (LC-MS) system for high-throughput screening, identification, and quantification of compounds in complex matrices.

Triple Quadrupole Mass Spectrometer

Shimadzu Scientific Instruments introduces the LCMS-8040, a triple quadrupole mass spectrometer, which combines ion optics and collision cell technology with ultrafast technologies.

Advertisement

Advertisement

Top Stories and Headlines
EVERY DAY!

FREE Email Newsletter